Carrying the Unit
Attaching the Hand Strap
1
Insert strap end loop into gap of
Attachment Pin.
2
Thread opposite end through the
end loop and pull strap tight in
the direction of arrow.
Caution
• This unit is a precision device. When carrying this unit, ensure that it does not swing
excessively. Do not drop this unit or subject it to strong impacts.
Using the Carrying Case
1
Open the carrying case.
2
Insert this unit into the lower
compartment.
3
Insert the PC Card HDD case into
the upper compartment with the
"PC Card HDD" mark facing
upwards.
4
Close the carrying case.
Caution
• When transporting the unit, always turn off the power and insert the PC Card HDD into its
case and then place the case inside the carrying case.
16
Eng.p14-17.p65
16
2003/02/13, 16:48