Thumbnail Operation And Messages In Usb Host Mode; P2 Card Access Led And Microp2 Card Status - Panasonic microP2 User Manual

Thumbnail operation and messages in USB host mode

Error codes other than the below listed are the same as when using a P2 card. Refer to the operating instructions of the product.
Thumbnail
Message
COPY IMPOSSIBLE. TOO LARGE
CLIP CONTAINED! (CLIP NAME:
XXXXXX)
NO FILE!
Software keyboard
r AJ‑HPX3100G/AJ‑HPX2000P/AJ‑HPX2100E/AG‑HPX600P/AG‑HPX600EJ/AG‑HPX600EN/AG‑HPX370P/AG‑HPX371E/AG‑HPX372EN/
AG‑HPX374ER/AG‑HPX250P/AG‑HPX250EJ/AG‑HPX250EN/AG‑HPX255P/AG‑HPX255EJ/AG‑HPX255EN/AG‑HPG20P/AG‑HPG20E
Message
CANNOT SET!
NO INPUT!
CANNOT SET!
RETRY PASSWORD IS DIFFERENT!
AUTHENTICATION ERROR!
r AG‑HPD24P/AG‑HPD24E/AJ‑HPM200P/AJ‑HPM200E/AJ‑HPD2500P/AJ‑HPD2500E
Message
RETRY PASSWORD IS DIFFERENT!
AUTHENTICATION ERROR!

P2 card access LED and microP2 card status

The LED and card statuses except for the below are the same as when using a P2 card. Refer to the operating instructions of the product.
r AJ‑HPX3100G/AJ‑HPX2000P/AJ‑HPX2100E/AG‑HPX600P/AG‑HPX600EJ/AG‑HPX600EN/AG‑HPX370P/AG‑HPX371E/AG‑HPX372EN/
AG‑HPX374ER/AG‑HPX250P/AG‑HPX250EJ/AG‑HPX250EN/AG‑HPX255P/AG‑HPX255EJ/AG‑HPX255EN
P2 card access LED
Off
Warning display
Detail
A file larger than 4 GB cannot be copied to a memory card
with 32 GB or smaller capacity.
The specified file does not exist.
Detail
No character is entered with the software keyboard.
The retry password does not match.
Manual authentication has failed.
Detail
The retry password does not match.
Manual authentication has failed.
Mode check display
[AUTH NG]
Copy the file to the product or to a microP2 card with
64 GB or larger capacity that has been formatted with the
latest P2 Viewer Plus.
Check the file.
Enter the password.
Enter the correct password and retry password.
Enter the correct password.
Enter the correct password and retry password.
Enter the correct password.
Authentication has not been performed. Writing/reading is
not available. Enter the correct password for authentication
setting.
– 9 –
Solution
Solution
Solution
microP2 card status