Table of Contents
Advertisement
Advanced Timer Recording
If the "Overlapped Timer Recording"
screen appears
If you set a timer recording that will overlap with other
timer recordings using the GUIDE Plus+ system, the
"Overlapped Timer Recording" screen appears to help
you eliminate the overlapping.
Follow the on-screen instructions.
Check, Change, Delete Programmes, or
Resolve Overlapping
The timer recording list can be viewed even when the unit
is off.
1
PROG CHECK
then 3, 4 to select the
programme.
Timer
Recording
No.
Press OK to store new programme.
A Timer Recording screen icons
F:
Timer programme is active.
μ:
Currently recording
: Programmes are overlapped. Recording of the programme
with the later start time starts when the earlier programme
finishes recording.
:
You stopped a daily, weekly or series timer recording. The
icon disappears the next time the timer recording starts
recording.
: The disc was full. (not enough space)
:
The TV programme may not be recorded due to copy-
protect.
Recording stopped (Dirty disc, etc.)
X:
:
Timer programmes set to Auto Renewal Recording (
:
Titles that have been rerouted to the HDD (Displayed while
recording.)
HDD Recording drive is set to HDD
DVD Recording drive is set to DVD
B Drive space
OK:
Recordable
> (Date): For daily or weekly timer recordings, the display will
show until when recordings can be made (up to one
month ahead from the present time) based on the
time remaining on the disc.
!:
It may not be possible to record because:
– the disc is write-protected.
– there is no more space left.
– the number of possible titles has reached its
maximum.
– programmes are overlapped.
– the timer programme is deactivated.
Relief:
Timer programmes that will be relief recorded to the
HDD.
C Channel name, programme name and other
information are displayed.
30
VQT2J34
Remain
HDD
30:24 SP
DVD
1:58 SP
SUN 10 /10/10 12:54:00
HDD
Drive
Channel
Date
Start
Stop
Mode STTL
AD
DVD
space
New Timer Programme
OK
RETURN
to delete.
2a
DELETE
– You cannot delete programmes that are
currently recording.
to modify the programme.
2b
OK
3, 4, 2, 1 to make changes,
then
OK
When a programme with
2c
OK
– If the programme was set from the TV Guide,
the available repeat programmes are
displayed. Press [3, 4] to select, then press
[OK].
– If the on-screen instructions do not appear,
change or delete the overlapped programme.
Tips
≥You can enter up to 32 programmes a month in advance.
You can also delete a programme with the following steps.
1 Press [3, 4] to select the programme and press [OPTION].
2 Press [3, 4] to select "Delete" and press [OK].
To exit the timer recording list
Press [PROG/CHECK].
Notes
≥Recording may fail if there are changes to the station's programming.
≥"F" disappears from the unit's display when no timer programme is
set or when all timer programmes are deactivated.
≥"-------" is displayed on a series recording item if there will be no
episode of the series for the next 8 days. We recommend you delete
the "-------" item after you confirm the last episode of the series is
recorded.
≥The "Guide Link" function may not work if you manually change the
start/end time by over 10 minutes.
31).
≥Programmes that failed to record are deleted from the timer recording
list at 4 a.m. two days later.
To deactivate timer programme
(e.g. to interrupt a daily or weekly timer
programming)
After performing step 1 (
2
(Red)
– "F" (
left) disappears from the timer
recording list.
– Press the "Red" button again to activate timer
programme.
Tips
You can deactivate the timer programme in the following
procedure as well.
Perform step 1 (
left)
1 Press [OPTION]
2 Press [3, 4] to select "Timer Off", then press [OK].
is selected
left)
Advertisement
Table of Contents
