Table of Contents
Advertisement
Adding a Digital Satellite Receiver: Connecting to a Television and a Digital Satellite
Receiver
To the aerial
Digital satellite antenna
1
The RF coaxial cable cannot be
used for showing pictures from the
unit. The unit must be connected
using another method, e.g. 21-pin
Scart cable to show pictures from
the unit on the television set.
1 Aerial cable to the "RF IN" on the digital satellite receiver.
2 RF coaxial cable from the "RF OUT" on the digital satellite receiver to the "RF IN" on the unit.
3 RF coaxial cable (included) from the "RF OUT" on the unit to the "RF IN/AERIAL" on the TV.
4 21-pin Scart cable from the "AV/VCR" on the digital satellite receiver to the "AV2 (EXT)" on the unit.
5 21-pin Scart cable from the "AV1 (TV)" on the unit to the "AV" on the TV.
6 21-pin Scart cable from the "AV/TV" on the digital satellite receiver to the "AV" on the TV.
To view digital satellite programmes
Refer to "Watching Digital Satellite Programmes" (
To record digital satellite programmes
Refer to "Recording from a Digital Satellite Receiver or External equipment" (
Connecting AC mains lead (included)
Connect only after all other connections are complete.
This unit
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even
when it is turned off.
[approx. 0.3 W ("Power Save in Standby" is activated and "RF OUT ( Aerial Signal )" is set to "Off".)]
After completing the above connections, proceed to the TV Tuning (
Digital satellite receiver
HDMI OUT
RF IN
DISH INPUT
AV/TV
RF OUT
AV/VCR
2
RF IN
RF OUT
19)
AC IN
6
This unit
AV1(TV)
4
AV2 (EXT)
HDMI AV OUT
3
You can enjoy high-quality picture by adding
the HDMI cable connection
28)
To household mains
socket
13).
Additional Connections
TV
HDMI IN
RF IN/AERIAL
AV
AV
HDMI IN
5
HDMI cable
12
110, 78
11
VQT2J34
Advertisement
Table of Contents
