Table of Contents
Advertisement
Additional Connections
Refere
nce
Using a fully wired 21-pin Scart cable
– You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (
– You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
"AV1 Output" in the Setup menu is set to "RGB 1" or "RGB 2" (
Make "AV2 Input" settings in the Setup menu (
Use of the RF coaxial cable
≥ Keep the RF coaxial cables as far away as possible from other cables.
≥ Do not roll up the RF coaxial cables.
≥ Before connection, turn off the mains for all connected equipment and read the appropriate operating
instructions.
Connect AC mains lead only after all other connections are complete.
BE SURE TO READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3.
Adding a VCR: Connecting to a Television and a Video Cassette Recorder
RF coaxial cable
HDMI cable
The RF coaxial cable cannot
be used for showing pictures
from the unit. The unit must
be connected using another
method, e.g.21-pin Scart cable
to show pictures from the unit
on the television set.
To record from a VCR
Refer to "Recording from a Digital Satellite Receiver or External equipment" (
Connecting to a Television with Audio/Video Cable (not included)
≥You can connect this unit to a TV using the audio/video (AV) cable instead of the HDMI cable or the 21-pin Scart cable (
≥Using a Scart or HDMI cable gives a higher quality picture than this connction.
≥Connect to terminals of the same colour.
AUDIO IN VIDEO IN
R
TV
78
VQT2J34
To the aerial
21-pin Scart cable
L
Audio cable/Video cable
75).
75).
RF IN
RF IN
AV1(TV)
RF OUT
AV2 (EXT)
RF IN
RF OUT
VCR
42).
You can enjoy
TV
high-quality
picture by adding
the HDMI cable
connection (
HDMI IN
AV
This unit
HDMI AV
OUT
AV
28).
VIDEO
L
R
AUDIO
OUT
This unit
12)
10, 11, 79).
Advertisement
Table of Contents
