Table of Contents
Advertisement
Advanced Timer Recording
If the "Overlapped Timer Recording"
screen appears
If you set a timer recording that will overlap with other
timer recordings using the GUIDE Plus+ system, the
"Overlapped Timer Recording" screen appears to help
you eliminate the overlapping.
Follow the on-screen instructions.
Check, Change, Delete Programmes, or
Resolve Overlapping
The timer recording list can be viewed even when the unit
is off.
1
PROG/CHECK
then 3, 4 to select the
programme.
Timer
Recording
No.
Channel
Press OK to store new programme.
A Timer Recording screen icons
F:
Timer programme is active.
Currently recording
μ:
: Programmes are overlapped. Recording of the programme
with the later start time starts when the earlier programme
finishes recording.
:
You stopped a daily or weekly timer recording. The icon
disappears the next time the timer recording starts
recording.
The disc was full. (not enough space)
:
:
The TV programme may not be recorded due to copy-
protect.
Recording stopped (Dirty disc or video cassette, etc.)
X:
Drive Recording drive is set to DVD or VHS
B Drive space (Except for [VHS] )
When the drive is set to VHS, "- -" is displayed.
OK:
Recordable
> (Date): For daily or weekly timer recordings, the display will
show until when recordings can be made (up to one
month ahead from the present time) based on the
time remaining on the disc.
!:
It may not be possible to record because:
– the disc is write-protected.
– there is no more space left.
– the number of possible titles has reached its
maximum.
– programmes are overlapped.
– the timer programme is deactivated.
C Channel name, programme name and other
information are displayed.
34
VQT2J51
Remain
DVD
1:34 SP
VHS
2:59 SP
TUE 12/10/10 12:54:00
Drive
Date
Start
Stop
Drive
Mode STTL
AD
space
New Timer Programme
OK
RETURN
DELETE
2a
– You cannot delete programmes that are
currently recording.
2b
OK
to modify the programme.
3, 4, 2, 1 to make changes,
then
OK
When a programme with
2c
OK
– If the programme was set from the TV Guide,
the available repeat programmes are
displayed. Press [3, 4] to select, then press
[OK].
– If the on-screen instructions do not appear,
change or delete the overlapped programme.
Tips
≥You can enter up to 16 programmes a month in advance.
You can also delete a programme with the following steps.
1 Press [3, 4] to select the programme and press [OPTION].
2 Press [3, 4] to select "Delete" and press [OK].
To exit the timer recording list
Press [PROG/CHECK].
Notes
≥Recording may fail if there are changes to the station's programming.
≥"F" disappears from the unit's display when no timer programme is
set or when all timer programmes are deactivated.
≥The "Guide Link" function may not work if you manually change the
start/end time by over 10 minutes.
≥Programmes that failed to record are deleted from the timer recording
list at 4 a.m. two days later.
To deactivate timer programme
(e.g. to interrupt a daily or weekly timer
programming)
After performing step 1 (
2
(Red)
– "F" (
recording list.
– Press the "Red" button again to activate timer
programme.
Tips
You can deactivate the timer programme in the following
procedure as well.
Perform step 1 (
1 Press [OPTION]
2 Press [3, 4] to select "Timer Off", then press [OK].
to delete.
is selected
left)
left) disappears from the timer
left)
Advertisement
Table of Contents
