Table of Contents
Advertisement
7 Press [3, 4] to select "Start Copying", then press
[OK].
Press [2] to select "Yes", then press [OK] to start copying.
The disc top menu is displayed.
– Disc play automatically begins from title 1 when "Title 1" is
selected from the "Auto-Play Select" menu when finalising the
disc (
69).
8 When the top menu is displayed
Press [3, 4, 2, 1] to select the title you want to start
copying, then press [OK].
My favourite
01
02
Chapter 1
Chapter 2
03
04
Chapter 3
Chapter 4
05
06
While playing in order, all the titles after the selected title are
recorded until the set time. (After the last title on the disc has
finished playing the top menu is recorded until the set time is
reached.)
Tips
To return to the previous screen
Press [RETURN
].
To stop copying
Press [∫].
You can also press and hold [RETURN
stop copying.
≥ If stopped partway, copying will be up to that point.
Notes
≥ If you perform search, frame-by-frame or pause while
copying, that portion of title is not recorded.
≥ The screen on the right is recorded at the
beginning.
≥ The content is recorded as 1 title from the
start of copy to the end.
≥ If play does not begin automatically or if
the top menu does not display
automatically, press [1] (PLAY) to start.
≥ Even if you copy a high quality video/audio DVD, the
original picture and audio quality cannot be exactly
replicated.
≥ If you want to copy a title from a finalised DVD-RW (DVD
Video Recording format), create a copy list and then copy
(
59, Copying using the copying list —Advanced Copy).
01/02
] for 3 seconds to
Copy Video ( MPEG2 ) from a video
equipment
Motion pictures encoded in the MPEG2 format, which have
been taken by a Panasonic digital video camera with HDD, etc.
can be copied from the camera's HDD to this unit's HDD or
DVD-RAM.
(All the recordings on the same date become a title.)
≥ You cannot playback SD Video in the camera's HDD with this
unit.
You must copy the files to the HDD or a DVD-RAM.
≥ You cannot playback or record while copying SD Video.
Video (MPEG2)
USB cable
Preparation:
1. Turn on both this unit and the camera.
2. Connect the camera to this unit with USB cable.
3. Select the appropriate mode that makes the camera ready
for data transfer (such as "PC CONNECT") on the camera.
≥ Refer to the camera's operating instructions for detail.
The display automatically appears when you connect the
camera to this unit. (
37)
Press [3, 4] to select "Video (MPEG2)", then press [OK].
Then go to step 7 on page 59.
USB device
Video ( MPEG2 )
≥ SD Video on the camera are automatically registered on the
copy list.
≥ If there are no SD Video on the camera, "Video (MPEG2)" is
not displayed.
VIDEO
HDD
DVD-RAM
DVD Video Recording format
VQT2J34
61
Advertisement
Table of Contents
