To Confirm And Edit A Timer Programme - Panasonic Diga DMR-XS380 Operating Instructions Manual

To confirm and edit a timer
programme
Press [PROG/CHECK].
Icons
Timer Recording
Remain HDD 30:30 DR
Channel Name Schedule
MON 18/10
22:00 - 23:00
MON 18/10
23:05 - 23:35
HD
MON
23:15 - 23:30
MON 18/10
23:20 - 23:50
HD
New Timer Programme
Total 4/32
DEL Delete
OK
Turn
Resolve overlap
RETURN
Timer Off
To exit the timer recording list
Press [PROG/CHECK].
≥ Failed programmes are deleted from the timer recording
list at 4 a.m. two days later.
≥ "-------" is displayed on a series recording item if there will
be no episode of the series for the next 8 days. We
recommend you delete the "-------" item after you confirm
the last episode of the series is recorded.
Screen icons
Red: Timer recording standby is activated.
F
Grey: Timer recording standby is deactivated.
Currently recording programme
[
Part or all of the programme will not be recorded
since the programme is overlapping.
Press the "Green" button to resolve overlapping.
( right)
The disc was full.
Copy-protected programme
It was not recorded.
The programme did not complete recording
because of some reason.
Auto Renewal Recording is set (
freesat programme is selected.
Other satellite programme is selected.
Guide Link ( 26)
Guide
Split Programme (
S/P
Series Timer Recording (
WED 13/10/2010 19:50
Drive/Mode Space
HDD
OK
DR
HDD
OK
DR
HDD
DR
HDD
!
DR
Info
Page Up
CH
Page Down
28).
26)
26)
OK Displayed if the recording can fit in the
remaining space
>
Daily or weekly timer programme is set. (up
(Date) to a maximum of one month from the
present time)
! It may not be possible to record because:
≥there is not enough space left.
≥the number of possible titles has reached
its maximum. (
≥programmes are deactivated.
To show a programme information
Select the programme, then press
[STATUS ].
Additional information is available for these
programmes.
To deactivate a timer programme
Select the programme, then press the "Red"
button.
≥The timer icon "F" ( left) will change from red to
grey.
≥Press the "Red" button again to activate timer
recording standby. (The timer icon "F" will change
to red.)
To change a timer programme
Select the programme, then press [OK].
( 28, step 3)
To resolve Overlapping
1 Select the programme with
the "Green" button.
2 Follow the on-screen instructions.
≥Programme overlapping can be resolved with
repeat programme if available.
≥ This function is not available for the timer programmes
that were set manually.
To delete a timer programme
Select the programme, then press [DEL].
111)
, then press
VQT2J57
29