Recording From External Equipment; Recording From Video Equipment - Panasonic Diga DMR-XS380 Operating Instructions Manual

Recording from external equipment

Recording from video
equipment
≥Turn off the unit and other video equipment before
connecting.
e.g., Connecting to the AV3 or DV input terminals on
the front
This unit
DV cable
(IEEE 1394,
4-pin)
Other video equipment
Connect to terminals of the same colour.
§
When recording from the unit's DV terminal
≥Select the audio type in "Audio Type for DV Input"
( 81).
≥When recording from DV equipment (e.g., digital
video camcorder), you can record audio/video
recordings from the DV tape only.
≥ The video quality will be degraded.
≥ While copying from DV input or executing the "Flexible
Recording via AV input" (
– Copy will stop when timer recording starts.
– Chasing playback, simultaneous rec and play, switching
of input cannot be performed.
– [-R] [-RW‹V›] [+R] [+RW] Chapter will be created
automatically.
62
VQT2J57
Audio/Video
cable
§
Connect to Audio/
Video output terminals.
63)
Manual recording
Recording disc: [HDD]
Recording mode: XP, SP, LP, EP
While stopped
1
Press [INPUT SELECT] to select the input
channel.
e.g., If you have connected to AV3 input terminals,
select "AV3".
2 Press [REC MODE] to select the recording
mode.
3 Start play on the connected equipment.
4 Press [¥ REC].
Recording starts.
5 Set the time to record (
To skip unwanted parts
Press [;] to pause recording.
≥Press again to restart recording.
To stop recording
Press [∫].
21).