Basic Connection - Panasonic Diga DMR-XS380 Operating Instructions Manual

Basic Connection

≥Connect both satellite terminals (DISH IN 1 and DISH IN 2) to the satellite dish when you want to record
2 programmes simultaneously or view TV during recording.
≥Connect DISH IN 1 terminal to the satellite dish when you use only one terminal. In this case, you cannot record
2 programmes simultaneously or view TV during recording.
≥Supply power from another device when you use 2 or more devices to receive satellite broadcast, because this
unit does not supply power when it is turned in standby.
≥Please consult with your Panasonic dealer for details of dish installation.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
≥Other Connections (
When connected to an HDMI compatible unit, you can enjoy high quality, digital video and audio.
≥The HDMI connection supports VIERA Link "HDAVI Control" (
BE SURE TO READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3
To household mains socket
(AC 220 to 240 V, 50 Hz)
Connect only after
all other
connections are
complete.
AC IN
This unit's rear panel
Required setting:
Set "HDMI Video Mode" and "HDMI Audio Output" to "On" (
(The default setting is "On".)
After completing the connections, proceed to Easy setting (
≥Refer to page 90 if "U50", "U50 1" or "U50 2" appears on the unit's display.
8
VQT2J57
89)
HDMI
AV OUT
Satellite cable
AC mains lead (supplied)
68).
TV's rear panel
HDMI IN
DISH DISH
IN 1 IN 2
83).
10).
AV
AV1 (TV)
Satellite dish
HDMI cable
21-pin Scart cable