To Confirm And Edit The Timer Programme - Panasonic DMR-XW390 Operating Instructions Manual

Recording
Timer recording
To confirm and edit the timer
programme
1
Press [PROG/CHECK].
e.g.,
Timer Recording
World news
Football
Star
Dogs and Cats
OK
RETURN
2
Select the programme, then perform the
operations.
To deactivate a timer programme
Press the red button.
• The timer icon "F" will change from red to
grey.
• Press the red button again to activate timer
recording standby. (The timer icon "F" will
change to red.)
To delete a timer programme
Press [DEL].
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to "Timer recording options".
(
3 Press [OK].
To show programme information
Press [STATUS
To exit the timer recording list
Press [EXIT].
28
VQT4C72
Downloaded from www.Manualslib.com
Icons (
Remain HDD 30:30 DR FRI 01.01.2012 8:59
Channel Name Drive/Mode Space
Schedule
HDD
FRI 08.01
12:20 - 13:00 DR
FRI 15.01 HDD
15:30 - 18:00 DR
FRI HDD
20:30 - 20:45 DR
HDD
FRI 01.01
22:30 - 23:30 DR
New Timer Programme
Total 3/32 Delete Info
DEL
Page Up
Turn
Resolve overlap
Page Down
Timer Off
26)
].
manuals search engine
Screen icons
Red: Timer recording standby is
activated.
F
Grey: Timer recording standby is
deactivated.
right)
Currently recording programme.
[
A part or all of the programme will not be
recorded since the programme is
OK overlapping.
OK
• Programme overlapping can be
-->
31.01
CH
The HDD is full.
Copy-protected programme, it was not
recorded.
The recording of the programme was not
completed because of some reason.
Auto Renewal Recording is set (
Guide Link (
Guide
Split Programme (
S/P
Series Timer Recording (
OK
Displayed if the recording can fit in the
remaining space.
>
Daily or weekly timer programme is set.
(Date)
!
It may not be possible to record
because:
- there is not enough space left.
- the number of possible titles has
- programmes are deactivated, etc.
resolved with repeat programme if
available.
1 Select the programme, then press
the green button.
2 Follow the on-screen instructions.
Red: Delete programme
Green: Record Repeat
programme
Yellow: Exit (Overlapping is not
resolved)
• This function is not available for the timer
programmes that were set manually.
25)
25)
reached its maximum. (
26).
25)
94)