Main Unit - Panasonic Diga DMR-XS380 Operating Instructions Manual

Main unit

∫ Remote Control signal sensor
20
30
30
20
Distance: Within approx. 7 m in front of the unit
1 Standby/on switch (Í/I) (
Press to switch the unit from on to standby mode
or vice versa. In standby mode, the unit is still
consuming a small amount of power.
2 Disc tray ( 14)
3 Connection for digital video (DV) camcorder
( 62)
4 Display ( below)
5 Recording indicator
6 Remote control signal sensor (
The unit's display
HDD HDD
SDVD
1 Disc indicator
2 Copying indicator
3 USB port indicator
4 SD card slot indicator
5 EXT LINK indicator
6 Timer recording indicator
This indicator lights up when the timer recording
standby is activated.
10, 14)
above)
COPY USB
DVD
Pull to flip down the
front panel.
7 Connection for VCR, Panasonic's video camera,
etc. ( 62)
8 Open/close disc tray (
9 SD card slot ( 14)
: USB port ( 14)
; Channel select ( 16)
< Start recording ( 21)/Specify a time to stop
recording ( 21)
= Stop
> Start play
Rear panel terminals (
SD EXT -L
PLAY
7 Drive (HDD, DVD or SD) indicator
8 Main display section indicator
Current time/playback counter, various messages
9 Remote control signal indicator
: Playback indicator
14)
8, 9, 89)
7
VQT2J57