Fax Features - Panasonic KX-FLB801E Operating Instructions Manual

Flat-bed multi-function laser fax
Table of Contents

Advertisement

7. Programmable Features

7.3 Fax features

Feature/Code
Changing the TEL/FAX
delayed ring setting
{#}{2}{1}{2}
Printing a sending report
{#}{4}{0}{1}
Setting the journal report
to print automatically
{#}{4}{0}{2}
Changing the receiving
mode in the manual
answer setting
{#}{4}{0}{4}
Sending documents
overseas
{#}{4}{1}{1}
60
Selection
If you use an extension telephone in TEL/FAX mode, select the
desired number of times the extension telephone rings before the unit
answers the call.
{1} "1"
{2} "2" (default)
{3} "3"
{4} "4"
{5} "5"
{6} "6"
{7} "7"
{8} "8"
{9} "9"
Note:
L See page 37 for details.
To print a sending report for fax transmission results (page 29).
{0} "OFF": Sending reports will not be printed.
{1} "ON": A sending report will be printed after every transmission.
{2} "ERROR" (default): A sending report will be printed only when fax
transmission fails.
{0} "OFF": The unit will not print a journal report, but will keep a record
of the last 30 fax transmissions and receptions.
{1} "ON" (default): The unit will print a journal report automatically
after every 30 new fax transmissions and receptions (page 29).
{1} "TEL" (default): Telephone mode (page 37)
{2} "TEL/FAX": Telephone/Fax mode (page 37)
If you cannot send a fax overseas even if the number is correct and the
line is connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission
speed.
{0} "OFF": Deactivates this feature.
{1} "NEXT FAX": This setting is effective only for the next attempted
fax transmission. After transmission, the unit will return to the previous
setting.
{2} "ERROR" (default): When the previous fax transmission fails and
you wish to re-send the document.
Note:
L This feature is not available for broadcast transmission.
L Calling charges may be higher than usual.

Advertisement

Table of Contents
loading

Table of Contents