Loading Paper Into The Bypass Tray; To Load Paper (Bypass Tray) - Konica Minolta BIZHUB C450P User Manual

Loading copy paper

Loading paper into the bypass tray

Paper can be fed manually through the bypass tray if you wish to print onto
paper that is not loaded into a paper tray, or if you wish to print onto thick
paper, A6cards, envelopes, overhead projector transparencies or label
sheets.

To load paper (bypass tray)

1
Open the bypass tray.
– When loading large-
sized paper, pull out
the tray extension.
2
With the side to be printed on facing down, insert the paper as much
as possible into the feed slot.
3
Slide the lateral guides
to fit the size of paper
being loaded.
Reminder
Do not load so many sheets that the top of the stack is higher than the
, mark.
Push the paper guides firmly up against the edges of the paper.
C450P
5
Tray extenstion
Lateral guides
5-21