Konica Minolta BIZHUB C450P User Manual page 174

Specifying printer driver settings
Note
If the paper size is other than the custom size, select the desired settings
after specifying the settings in Custom Size.
When "W" is selected for each standard paper size in the printer driver,
the data can be centered and printed.
For example, if A4 size data is created and you want to center and print
on A3 size paper, specify "A4 W" as the paper size in the printer driver
and specify "Tray 1" or "Bypass Tray" as the paper source.
To print, load A3 paper in the tray ("Tray 1" or "Bypass Tray") that is spec-
ified in the printer driver, and then select "Paper Tray" in the control panel
and follow the steps described below to specify the paper size for the pa-
per tray that is used.
Select [A4 W].
Enter the A3 paper size in [Oversize Paper].
C450P
3
3-47