Konica Minolta BIZHUB C450P User Manual page 272

Control panel settings
SNMP
TCP Socket
C450P
Parameters
SNMP Setting
UDP Port Number
v1/v2c Setting
Read Community
Write Setting
Write Community
v3 Setting
Context Name
Discovery Set
Read Setting
Write Setting
TCP Socket
(Binary Mode)
TCP Socket Set
Port No.
SSL Setting
Port No. (SSL)
TCP Socket
(ASCII Mode)
TCP Socket Set
Port No.
Description
Select whether or not SNMP is
used.
If it is used, specify whether or not
"SNMP v1/v2c (IP)", "SNMP v3
(IP)", or "SNMP v1 (IPX)" is used.
Specify the UDP port number.
Specify the SNMP v1/v2c settings.
Register the name of the read com-
munity. As a default, "public" is
specified.
Select whether to enable or disable
the write permissions.
Register the name of the write com-
munity. As a default, "private" is
specified.
Specify the SNMP v3 settings.
Register the context name.
Select whether to enable or disable
the discovery user permissions.
Specify the security level for read-
ing.
Specify the security level for writing.
Specify the WINS function for SMB.
Select whether or not TCP socket
settings are used.
Register the number of the port to
be used.
Select whether or not SSL/TLS is
used.
Register the number of the port to
be used.
Specify the print function for SMB.
Select whether or not TCP socket
settings are used.
Register the number of the port to
be used.
4
Initial Setting
OFF
—
—
—
Enable
—
—
—
Enable
—
—
—
ON
—
ON
—
—
ON
—
4-39