Specifying printer driver settings
Center Binding
You can specify to center staple and fold a printed document.
1
Click the Layout tab.
2
From the "Center Staple and Fold" drop-down list, select "Center Sta-
ple and Fold".
3
To avoid printing on the folded part of the document, select the "Center
Erase" check box.
Note
The center binding function is available only when optional finisher FS-
603 is installed.
Hole punching
Holes can be punched into the printed document.
1
Click the Layout tab.
2
From the drop-down list, select "4 Holes" as the number of punched
holes.
Note
The hole punch function is available only when optional Finisher FS-507
or FS-603 is installed. When using the optional Finisher FS-603, the
punch kit must be installed.
Note
Depending on the selected Binding Position setting, different hole-
punching positions are available.
C450P
3
3-55