Konica Minolta BIZHUB PRO 1050EP User Manual page 198

6
3
Press the [Start/Stop] button.
If multi-feeding is detected and the
machine stops even if single sheet is
fed, press the Multi-Feed Detection
button to turn on the lamp below.
!
Details
To interrupt the operation, press the
Start/Stop button again.
Note
Using Fold&Staple mode, the finished sets will be delivered to the saddle
stitcher tray of Saddle Stitcher SD-501. Be sure to withdraw the saddle
stitcher tray, and open the tray stand when fully withdrawn. See p. 6-11
for details.
!
Details
To fold or fold&staple booklet-styled prints manually, arrange the printed
sheets as shown below before placing them into the post inserter.
6-20
Setting Output Methods
Start/Stop button
ON
OFF
Multi-Feed Detection button
bizhub PRO 1050P/1050eP