Konica Minolta BIZHUB C352P User Manual page 124

3
6
Use the NetWare server console to load PSERVER.NLM.
– In Administrator mode of PageScope Web Connection, select "Net-
Ware Setting" from the Network tab, and then specify the following
settings.
– IPX Setting: Select "ON".
– Ethernet Frame Type: Select "Auto Detect". (Select the frame type
according to the network environment.)
– NetWare Print Mode: Select "Nprinter/Rprinter".
– Printer Name: Specify the printer name.
– Printer Number: Specify the printer number (0-255). When 255 is
specified, the setting is "Auto".
7
Restart this machine (turn it off, then on again).
8
Use the NetWare server console to display the print server screen, and
then check that the created printer is shown as "Waiting for Job" for
the connected printer (0).
3-52
Setting up the printer driver
C352P