Precautions For Routine Handling - Konica Minolta 7033 Instruction Manual

Section 1 : Precautions for Installation and Use
*
270.3
546
* Dimensions required when the Finisher is withdrawn.

Precautions for Routine Handling

CAUTION: Actions in Response to Troubles
• If the Service Call screen is displayed and copier operations cannot be continued any
more, stop the operation to prevent any unexpected accident. Write down the Report
Code as stated on the 2nd line of the message, then switch off the copier and disconnect
from the power socket. Contact your Service Centre and inform them of the Report Code.
• Do not touch the high temperature or high voltage parts indicated with caution labels or
described in the manual.
• Do not touch the inside of the machine for any other purpose than removing jammed
paper or adding toner.
• If machine repair is necessary, be sure to contact your Service Centre. Never attempt to
repair it by yourself.
• If any abnormal sound, smell or smoke comes from the machine, immediately stop using
it, turn off the power switch, disconnect the power plug and contact your Service Centre.
• If the breaker trips or the fuse blows, turn off the power switch, reset the breaker or the
fuse, and turn on the machine. If the same situation occurs again, contact your Service
Centre.
• Insure the replacement fuse conforms with the rating of the power source. Never use a
fuse with an incorrect rating.
500
645 430
1145
1191
1397
1891.3
Konica 7033 + FS-105 + DB-608
3. Requirements for Safe Use (continued)
800
1645
1687
Precaution for
Unit: mm
200
687
1 - 7
Installation
and Use