Playing Dvds, Vcds Or S-Vcds - Silvercrest KH 6778 Operating Instructions Manual

11. Playing DVDs, VCDs or S-VCDs

Proceed in the following manner to play a DVD/VCD/S-VCD
on the DVD Player ...
1 Switch on the television to which the DVD Player is con-
nected.
2
Ensure that the DVD Player has been switched on and is
ready to operate.
If the television, DVD player and possibly other connected de-
vices (e.g. an audio component) are operational and switched
on and the DVD player is properly connected to the television,
you can now see the SilverCrest Opening logo on the television:
"NoDisc" is faded in on the television screen and on the
display on the front side of the DVD Player if no disc has
been loaded in the disc drawer of the DVD Player.
3
Open the disc drawer on the front of the DVD Player by
pressing once the "Open/Close"
of the DVD Player or on the remote control. "Open" then
appears on the display on the front of the DVD Player
and on the television screen.
4 Load a DVD/VCD/S-VCD with label side facing upwards
in the disc drawer.
Please note:
DVDs, VCDs and S-VCDs that are to be played on the
DVD Player may have a country code printed on the
DVD/VCDs/S-VCDs sleeve. The DVD Player can only
play DVDs/VCDs/S-VCDs with the Country Code 2.
If no country code is printed on the sleeve of a DVD/
VCD/S-VCD ...
• but rather the symbol
• the given DVD/VCD/S-VCD cannot be played on
5 Press the "Open/Close"
Player or on the remote control once again to close the
disc drawer. "Close" will be indicated on the display on
the front of the DVD Player and on the television screen
while the disc drawer is closing.
6
The contents of the DVD/VCD/S-VCD are now loaded;
this can take several seconds. In the meantime "Load"
will be flashing on the display on the front of the DVD
Player, and "Load" is displayed on the television screen.
7 The loaded DVD/VCD/S-VCD starts automatically.
Depending upon the loaded DVD/VCD/S-VCD, the film
on the DVD may not be immediately played because an
option may first appear on the television screen.
In such an event ...
Select with the control buttons
mote control, the menu item with which film playing
is started.
8
button on the front To start playback of the film ...
• Press the "OK" button on the remote control once
• Press the "Play" button on the front of the DVD Player
or on the remote control once.
"Play" is briefly displayed on the television screen, and the dis-
play on the front of the DVD Player indicates the following:
1
The DVD video symbol
1
loaded or, when a VCD/S-VCD is loaded: "VCD" or "S-
VCD"
, then the DVD/VCD/SVCD
can be played on the DVD Player, or
the DVD Player. To check, simply by trying to play
the DVD.
button on the front of the DVD
or
2 3
on the re-
4 5
when a DVD has been
Silvercrest KH 6778 21