Table of Contents
Advertisement
11. Initial operation of the DVD player
After you have ...
•
placed the DVD player in a suitable location
•
connected the DVD player to a television by one of the designated
connection options
•
connected the DVD player, if desired, to a HiFi or Surround system
(analogue/digital) for example a Dolby Digital or DTS receiver
•
made the remote control ready for operation by inserting the batteries
•
and know how to activate and operate the OSD menu with the remote
control
... the DVD player is ready for operation.
11.1 Switching the DVD player on/off
• Insert the mains power cable into a properly installed mains power socket.
POWER
• Place the
switch on the rear panel of the device to the
The DVD player is now in standby mode.
STANDBY
• With the
button on the remote control or the
on the device you switch the DVD player on and/or back to the standby
mode.
• To switch the DVD player off place the
OFF
the device to the
position.
Note:
The device has no display indicators when it is switched off or in the standby
mode. In standby mode the standby LED lights up in the display.
11.2 Inserting the DVD
To play a disc with the DVD player:
•
Switch on your television.
•
Make sure that the DVD player is ready for operation.
If the television, the DVD player and possibly other connected devices (i.e. an
audio component) are ready for operation and are switched on and the DVD
player is connected correctly to the television you will now see the Silvercrest
logo on the TV screen
If no disc is inserted into the DVD player's disc tray:
The message NO DISC is displayed on the television screen.
•
Open the disc tray by pressing the button
trol or on the front panel of the DVD player. OPEN is displayed on the
television screen.
•
Insert the disc in the disc tray with the inscribed/labled side up.
For two-sided discs: The side you would like to play must face down.
•
After you have inserted the disc press the button
mote control or on the front panel of the DVD player again to close the
disc tray.
•
The contents of the disc will now be loaded; this may take a few seconds.
In the meantime LOADING is displayed on the television screen.
ON
position.
STANDBY
button
POWER
switch on the rear panel of
OPEN/CLOSE
on the remote con-
OPEN/CLOSE
on the re-
12. Playing back DVDs, VCDs or S-VCDs
To play back a DVD/VCD/S-VCD with the DVD player...
•
Switch on your television.
•
Make sure that the DVD player is ready for operation.
If the television, the DVD player and possibly other connected devices (i.e. an
audio component) are ready for operation and are switched on and the DVD
player is connected correctly to the television you will now see the "Silvercrest"
logo on the TV screen
• Open the disc tray on the front panel of the DVD player by pressing the
OPEN/CLOSE
button.
O O P P E E N N now appears in the display on the front panel of the DVD player and
on the television screen.
• Insert a DVD/VCD/S-VCD disc in the disc tray with the inscribed/labled
side up.
OPEN/CLOSE
• Press the
button again to close the disc tray.
CLOSE will appear in the display on the front panel of the DVD player and
on the television screen while the disc tray is closing.
• The contents of the inserted DVD/VCD/S-VCD will now be loaded; this
may take a few seconds. In the meantime LOADING blinks in the display
on the front panel of the DVD player and on the television screen.
• Playback of the inserted DVD/VCD/S-VCD starts automatically.
Note:
DVDs, VCDs and S-VCDs that you want to playback with the DVD player
may possibly have a country code which is printed on the DVD's jacket.
The DVD player can only playback DVDs/VCDs/S-VCDs with the country code
If no country code is printed on the cover of a DVD/VCD/S-VCD...
• but instead the symbol
played back with the DVD player
• then the DVD/VCD/S-VCD can possibly not be played back with the
DVD player. You can check this by attempting to play back the DVD.
Depending on the inserted DVD/VCD/S-VCD it is possible that the contents
of the DVD/VCD/S-VCD will not playback immediately, rather first a selection
menu appears on the television screen.
In this event select the menu option, which will start the playback of the film,
with the control buttons
• To start playback of the film press the
PLAY/PAUSE
or press the
- 12 -
, then the DVD/VCD/S-VCD can be
on the remote control.
ENTER
button on the remote control
button.
.
Advertisement
Table of Contents
