Selecting Your Own Password; Returning The Dvd Player To The Works Settings - Silvercrest KH 6778 Operating Instructions Manual

• ... on some DVDs/VCDs/S-VCDs with a printed par-
ent guidance rating, the child lock will not indicate
any function in connection with the set age release
rating.

Selecting your own password

You can replace the works set password "8888" with your own
four-digit password composed of the numerals 0 to 9.
For this purpose proceed in the following manner ...
1 Stop a disc that may be currently playing in the DVD Player
by pressing the "Stop" button on the front of the DVD
Player, or on the remote control, once.
2 Press the "Setup" button on the remote control once to
fade in the OSD menu on the television screen.
3 Select the "Parental" menu item by pressing the control
button , followed by depressing the "OK" button on the
remote control once.
4 The "Parental" menu will then be displayed with its sub-
items ...
Password – – – –
Rating G
Load factory Reset
The "Password" menu sub-item is the first to be auto-
matically selected. Enter with the number buttons on
the remote control the works set password "8888" in the
input field marked "– – – –".
5
Confirm the entry by pressing the "OK" button once. The
symbol behind the input field is then replaced by the
symbol .
6 Enter with the number buttons 0 to 9 your new four-digit
password in the input field marked "– – – –". Confirm your
entry by pressing the "OK" button once.
7 Your newly entered password is then set with immedi-
ate effect. The symbol
replaced by the symbol .
8
Press the control button
main menu bar.
9 Fade out the OSD menu by pressing the "Setup" button
once.
Please note:
Should you have forgotten your new password, then
you can continue with the old, works set "8888" pass-
word.
behind the input field is then
once again to return to the
Returning the DVD Player to the works
settings
If you wish to reverse all the settings you have made in the
OSD menu back to the original works settings, then proceed
in the following manner ...
1
In the event that a disc loaded in the DVD Player is cur-
rently being played, then terminate this by pressing the
"Stop" button on the front of the DVD Player, or on the
remote control, once.
2 Press the "Setup" button on the remote control to display
the OSD menu on the television screen.
3
Press the control button
item, and then press the "OK" button on the remote con-
trol.
4 The "Parental" menu is then displayed with its sub-items ...
Password – – – –
Rating G
Load factory Reset
The "Password" menu sub-item is the first to be automati-
cally selected.
5
Press the control button
menu sub-item. The "Reset" option is then marked.
6 Press the "OK" button once.
7
The DVD Player is then returned to the works settings.
Wait for ten seconds before restarting the DVD Player.
Please note:
Please realise that returning to the works settings will
cancel all your previous settings in the OSD menu!
Warning:
A return to the works settings will also change the
Stereo Downmix settings. In the event that ...
• The DVD Player is connected to a stereo television
and no audio units are connected to the DVD Play-
er, or
• A Dolby Prologic-compatible audio unit has been
connected to the stereo output (via a chinch cable
and the chinch sockets "FL" and "FR") of the DVD
Player – as described in chapter "Connecting a HiFi
system"
to select the "Parental" menu
to select the "Load Factory"
Silvercrest KH 6778 51