Ending Playback (Stop); With Resume Function; Without Resume Function; Jumping To The Beginning Of A Title (Skip) - Silvercrest KH 6778 Operating Instructions Manual

Ending playback (Stop)

To terminate playback of a title on the loaded audio-CD, press
the "Stop" button on the front of the DVD Player or on the
remote control once.

... with Resume function

If playback of a title on the loaded audio-CD has been termi-
nated by pressing the "Stop"
Player will automatically store the point at which playback
was terminated ("Resume" function"). The television screen
will display "Stop [Play to Resume]". As soon as the "Play"
button on the front of the DVD Player or on the remote con-
trol is pressed again, playback of the title will be resumed
from the point it was stopped.

... without Resume function

If playback of a title on the loaded audio-CD has been ter-
minated by pressing the "Stop" button once, pressing the
"Stop" button a second time will delete the stored point
at which playback was interrupted. Consequently, when the
"Play" button is pressed, playback will commence with the
first title on the audio-CD.

Jumping to the beginning of a title (Skip)

Pressing the "Skip Forward"
tons on the front of the DVD Player while a title is being
played will initiate the following functions ...
• Advance to the beginning of the next title, or
• Return to the beginning of the preceding title.
The selected title is immediately played without having to
press the "Play" button. The number of the selected title
is indicated on the display on the front of the DVD Player to
the left of the playing time.

Intro function (Disc Scan)

Each title on the loaded audio-CD is played in succession
for a few seconds when the Disc Scan function is switch on.
Playback ends with the last title on the audio-CD.
Proceed as follows to switch on the Disc Scan function ...
1 Press the "Stop" button on the front of the DVD Player
or on the remote control once during playback of the
audio-CD.
2
Then press the "Title" button on the remote control once.
The Disc Scan function starts immediately with the first
title on the audio-CD.
3 To turn off the Disc Scan function press the "Stop" but-
ton once during playback.
32 Silvercrest KH 6778
button once, then the DVD
and "Skip Backward" but-

Direct title selection

Instead of the "Skip Forward"
tons, titles can be directly selected on the audio-CD that is
being played with the following input procedures:

Entering the title with the numeral buttons

Proceed as follows for direct title selection by entering the
title number with the numeral buttons ...
1 Press during title playback, or when playback has been
stopped or terminated, the numeral buttons on the re-
mote control that are equivalent to the title number – e.g.
button "3" for the third title, or consecutively the buttons
"1" and "0" for the tenth title. The entered numbers are
indicated on the television screen.
2 Confirm by pressing the "OK" button on the remote con-
trol once. Playback of the title with the entered number
starts immediately.

Search function

The Search function can be used to directly select certain
titles, or passages of certain titles, on the loaded audio-CD:
Selecting passages of a title by way of the
time position
Proceed as follows to select a certain passage of a given title
by entering its time position ...
1
Press the "Search" button on the remote control once
while a title is being played or during stopped playback.
The "Search" menu will be displayed on the television
screen:
Track Search
Time
Track
2
Enter the six-digit time position in hours, minutes
and seconds in the "Time" input field marked with
"– – : – – : – –".
Example: You wish to select a passage that commences
one minute after the beginning of the title. Press, one after
the other, the following numeral buttons ...
• "0", "0" for 0 hours;
• "0", "1" for 1 minutes;
• "0", "0" for 0 seconds.
2
Press the "OK" key on the remote control once to start
playback of the title at the selected time position.
and "Skip Backward" but-
– – : – – : – –
– – : – – : – –