Audio Settings; Setting Prologic; Setting Digital Output; Speaker Settings - Silvercrest KH 6778 Operating Instructions Manual

9.4. Audio settings

1
Press the control button
menu item.
2 The "More Aud" menu with the following sub-items and
the current settings for each sub-item will now be dis-
played on the television screen:
Language Video
Prologic Off
Digital Out Raw
Pink Noise Off

Setting Prologic

3 The "Prologic" menu sub-item is the first to be automati-
cally selected. Press the "OK" button once. The available
options for the "Prologic" sub-item will be displayed on
the television screen:
Off
Set "Off" if an amplifier, receiver or HiFi system not com-
patible with Dolby Prologic is connected to the analog
stereo output ("FL" and "FR" chinch sockets) of the DVD
Player
On
Set "On" when an amplifier, receiver or HiFi system com-
patible with Dolby Prologic is connected to the analog
stereo output (via chinch cable in the "FL" and "FR" chinch
sockets) of the DVD Player, as described in the Chapter
"Connecting a HiFi System". In this instance it will be
additionally necessary to set "Stereo Downmix" in the

speaker settings.

➧ For this subject please refer to Chapter 9.4. "Audio Set-
tings: Setting Speaker Sizes – Stereo-Downmix".
4
Select with the control buttons
options "On" and "Off". Confirm the choice by pressing
the "OK" button once.

Setting Digital Output

5
Press the control button
sub-item "Digital Output". Press the "OK" button once to
confirm. The options available for the sub-item "Digital
Output" will be displayed on the television screen:
16 Silvercrest KH 6778
twice to select the "More Aud"
Audio More Aud Parental
and between the
once to select the menu
Raw
Set to „Raw", if you have connected a multi-channel digital
audio component, for e.g. a Dolby Digital or DTS receiver
or a 5.1 channel surround system to the DVD player via a
coaxial cable.
PCM
Set to „PCM", if you have connected a two-channel digital
audio component to the DVD player via a coaxial cable.
Off
Set "Off" if no digital audio components have been con-
nected to the DVD Player.
6 Select with the control buttons
options "Raw", "PCM" and "Off". Press the "OK" button once
to confirm the choice.
7
Press the control button
OSD menu bar, and then press the "Setup" button once
to fade out the OSD menu.
Speaker settings
For an optimal sound experience it is necessary to adapt
sound reproduction to ...
• The connected audio components
• The spatial conditions at the point of installation of the
DVD Player/audio components, and
• Your personal preferences.
Please note:
The subsequent steps are only related to the con-
nection of a DVD Player to an audio component via
analog cables.
If you have opted for a digital connection ...
• Connection via a coaxial cable, or
... then the subsequently described speaker settings
do not have to be adjusted on the DVD Player, but
rather on the given audio component. Please refer to
the operating instructions for the given audio com-
ponent to find out how the settings are adjusted on
the given component.

Setting speaker sizes

Before changing the speaker settings:
and between the
three times to return to the