Table of Contents
Advertisement
Using the VIERA Link "HDAVI Control
Speaker control
You can select whether audio is output from this unit's
speakers or the TV speakers by using the TV menu
settings. For details, refer to the operating instructions for
your TV.
Home Cinema
This unit's speakers are active.
≥When you turn on this unit, this unit's speakers will be
automatically activated.
≥When this unit is in standby mode, changing the TV
speakers to this unit's speakers in the TV menu will
automatically turn this unit on and select "AUX"
"D-IN"
as the source.
§
≥The TV speakers are automatically muted.
≥You can control the volume setting using the volume or
mute button on the TV's remote control. (The volume
level is displayed on this unit's display.)
≥To cancel muting, you can also use this unit's remote
control (
38).
≥If you turn off this unit, TV speakers will be
automatically activated.
TV
TV speakers are active.
≥The volume of this unit is set to "0".
–This function works only when "DVD/CD", "USB",
"AUX"
or "D-IN"
§
unit.
≥Audio output is 2-channel audio.
When switching between this unit speakers and TV
speakers, the TV screen may be blank for several
seconds.
22
is selected as the source on this
§
" (continued)
TM
VIERA Link Control only with TV's remote control
(for "HDAVI Control 2 or later")
You can control the playback menus of this unit with the
TV's remote control. When operating the TV's remote
control, refer to the below illustration for operation buttons.
1 Select this unit's operation menu by using the TV menu
settings. (For details, refer to the operating instructions
for your TV.)
The START menu will be shown.
e.g. [DVD-V]
DVD/CD
or
§
≥The START menu can also be shown by using a
button on the TV's remote control (e.g. [OPTION]).
–When "DVD/CD" or "USB" is selected as the source,
the TV's remote control works only during stop mode.
–This feature does not work while the iPod music
playback screen is displayed on the TV.
2 Select the desired item on the START menu (
When the on-screen control panel appears
e.g. [DVD-V] (when "Playback Disc" is selected from the
START menu.)
You can operate the playback with the indicated controls.
≥The on-screen control panel can also be shown by
using a button on the TV's remote control (e.g.
[OPTION]).
–This works only during "DVD/CD" or "USB" playback
and resume modes or, while the iPod music playback
screen is displayed on the TV.
If the TV has automatically switched to the HDMI
input mode for this unit (
The TV will automatically switch to TV tuner mode when:
–you press [EXIT] button on the TV's remote control.
–you press [EXIT] or [RETURN] button on the TV's
remote control to exit the START menu.
This does not work during playback or resume mode
when "DVD/CD" or "USB" is selected as the source. (For
"IPOD" mode, this works only in iPod music mode, or
when iPod is not connected.)
[Note]
≥Depending on the menu, some button operations
cannot be performed from the TV's remote control.
≥You cannot input numbers with the numbered buttons
on the TV's remote control ([0] to [9]). Use this unit's
remote control to select the play list etc.
Home Cinema
Playback Disc
Playback/
TOP MENU (DVD)
MENU (DVD)
menu access
Input Selection
Sound
OK
RETURN
21, Auto input switching)
12).
Hide quick links:
Advertisement
Table of Contents
