Dolby Pro Logic; Super Surround Sound; Volume Control Of Speaker - Panasonic SC-HT600 Operating Instructions Manual

When you enjoy a singnal source in double channel , press
[SURROUND], Each time when you press, the screen on the main
unit will display by the following order:
SRND OFF (SURROUND OFF )
DOLBY PL ( DOLBY PRO LOGIC)
S.SRND

(SUPER SURROUND SOUND)

DOLBY PRO LOGIC

DOLBY PRO LOGIC is developed for better scene sensation of
signal sources coded by Dolby surround. The location sensation
is improved by addition of a center and surround channel.
The software coded by Dolby surround is provided with the
identification tag (DVD, CD, VCD, LCD and video cassette).
Press [SURROUND] to
select DOLBY PL .
The unit plays the signal source coded by Dolby
surround
To cancel it
Press [SURROUND ] select SRND OFF .
Note
When the unit plays the DVD recorded by DTS, you should close
the function of DolbyLogic. If the function is enabled, the surround
effect cannot be properly reproduced.
SUPER SURROUND SOUND
Auditory sensation is improved by enhancement of stereo
surround effect.
Press [SURROUND] to Select S.SRND .
Adjust the volume of surround speakers to get optimal surround
effect.
(See Volume control of Speaker at right side)
Note
When the unit plays the DVD recorded by Dolby Digital or DTS,
you should close the function of super surround. If the function is
in operation, the surround effect cannot be properly reproduced.
Manufactured under license from Dolby laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Volume control of speaker

When you enjoy a certain signal source, please adjust and align the
speaker levels if you feel an appearance of nonconformity.
Preparations
Press [SELECTOR] to select DVD/CD . Press [surround] to
select DOLBY PL or SRND OFF .
Press [SHIFT] + [TEST] to output a test signal.
Lch: front left channel
Cch: center channel
Rch: front right channel
RSch: right surround channel
LSch: left surround channel
Press [- VOLUME +] or turn the volume knob to set the normal
level of signal source for enjoyment.
Adjust the balance between front speakers.
Press [L-BALANCE-R] button, choose L or R .
4
Press [
AAC DTS ZOOM C, RS, LS: (-10db to +6 db)
DIGITAL C.F
To stop the test signals, Press [SHIFT] + [TEST] again.
PL SFC SSS
PG PROG. CSM
To adjust speaker level during play
Press [SHIFT] + [CH.SELECT] to select speaker.
Cch
SWch: Active subwoofer
Press [
C, RS, LS: (-10db to +6 db)
SW:
Adjustment of the time delay on the surround speakers.(DOLBY
PRO LOGIC only)
Press [SHIFT] + [DELAY] .
Each time when you press, the screen on the main unit will
display by the following order:
DELAY 15ms
Note
When the S.SRND in the display of the main unit is on , you
may adjust Sch.
Manufactured under license from Digital Theater Systems,
Inc. US Pat. No. 5, 451, 942, 5, 956, 674, 5, 974, 380,
5, 978, 762 and other world-wide patents issued and
pending. DTS and DTS Digital Surround are registered
trademarks of Digital Theater Systems, Inc. Copyright 1996,
2000 Digital Theater Systems, Inc. All rights reserved.
] (for increase) or [ ] (for decrease) .
RSch LSch SWch
] (for increase) or [ ] (for decrease) .
(-10db to +6 db)
DELAY 20ms DELAY 30ms