Selecting the playback source
DVD
USB, iPod
SETUP
Selecting the source from the START menu
You can select sound effects, desired source, or access
playback/menus by using the START menu.
1
2
OK
3
OK
When "Input Selection" is selected
You can select a desired source from the menu.
≥DVD/CD (
10), FM (
DIGITAL IN
(
right), USB (
§
"(TV)" will appear beside "AUX" or "DIGITAL IN", indicating
§
the TV audio setting for VIERA Link "HDAVI Control" (
When "Sound" is selected
You can select sound quality settings (
When a disc is loaded or a USB device is connected, you
can also access playback or menus from the START menu.
e.g. [DVD-V]
DVD/CD
Playback Disc
TOP MENU (DVD)
MENU (DVD)
Input Selection
Sound
OK
RETURN
When the on-screen control panel appears
e.g. [DVD-V] (when "Playback Disc" is selected from the
START menu)
You can operate the playback with the indicated controls.
12
USB
RADIO
RADIO, EXT-IN
DVD
iPod
EXT-IN
START
OK
OK
SETUP
Show the START menu.
This unit automatically turns on.
(The TV also turns on when using
VIERA Link "HDAVI Control". This
works only when in "DVD/CD", "USB"
or "IPOD" mode without any disc/
device being loaded/connected.)
e.g.
DVD/CD
Home Cinema
Input Selection
Sound
OK
RETURN
Select an item.
≥To exit, press [START].
Make the setting.
11), AUX
(
right),
§
24), iPod (
13, Equalizer).
Home Cinema
Playback/
menu access
Selecting the source by the remote control
DVD
RADIO
EXT-IN
USB
iPod
Press [DVD], [iPod/USB], [RADIO/EXT-IN] on this unit to
select source from this unit. (
[Note]
Confirm the audio connection to the AUX or OPTICAL IN
terminal on this unit when you select the corresponding
sources (
minimum, and then adjust the volume of this unit.
Making settings for digital audio input
Select to suit the type of audio from the OPTICAL IN
terminal on this unit.
1 While in "D-IN" mode
Press [SETUP] to select "MAIN/SAP", "DRC" or
"PCM FIX".
2 While the selected mode is displayed
Press [3, 4] to make the setting.
MAIN/SAP mode (Only works with Dolby Dual Mono):
MAIN, SAP
"SAP" = Secondary Audio Program
§
Dynamic Range Compression
DRC ON: Adjust for clarity even when the volume is
23)
21).
DRC OFF:The full dynamic range of the signal is
PCM FIX mode
PCM ON: Select when receiving only PCM signals.
PCM OFF:Select when receiving Dolby Digital and
(When receiving true 5.1-channel surround sound, select
"PCM OFF".)
[Note]
≥Audio that is input through the OPTICAL IN terminal is
not output from the HDMI terminal.
≥Underlined items in the above paragraphs are factory
settings.
DVD/CD (
10)
Each time you press the button:
FM (
11)
AUX
:
For audio input through the
§
AUX terminal.
D-IN
:
For audio input through the
§
OPTICAL IN terminal. (
"(TV)" will appear beside "AUX" or
§
"D-IN", indicating the TV audio
setting for VIERA Link "HDAVI
Control" (
21).
iPod (
23)
USB (
24)
39)
8, 9). Reduce the volume on the TV to its
, MAIN+SAP
(stereo audio)
§
§
low by compressing the range of the lowest
sound level and the highest sound level.
Convenient for late night viewing. (Only
works with Dolby Digital)
reproduced.
PCM signals.
below)