Step 3 Ac Mains Lead Connection; Step 4 Preparing The Remote Control - Panasonic SC-PTX60 Operating Instructions Manual

Other audio connection
TV or external
equipment
terminal
Optical digital audio cable
≥Do not bend sharply
OPTICAL OUT
when connecting.
[Note]
If you have various sound sources (such as Blu-ray player, DVD recorder, VCR, etc.), connect them to the available
inputs on the TV and the TV output should then be connected to the AUX or OPTICAL IN terminal of this unit.
step 3 AC mains lead connection
To household
mains socket
AC IN
AC mains lead (included)
step 4 Preparing the remote control
Batteries
Insert so the poles ( and ) match those in the
remote control.
R6/LR6, AA
Replace the cover.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer's instructions.
Cable required
(not included)
[\\\\\OPTICAL\IN\\\\\] This is the preferred connection for
This unit
Press in and lift up.
This unit
terminal
optimum sound and surround sound.
This unit can decode the surround signals
received from your TV, cable or satellite
STB. Refer to the operating instructions for
the TV, cable or satellite STB for the
settings necessary to output its audio from
the digital audio output to your home
theater system. Only Dolby Digital and
PCM can be played with this connection.
≥After making this connection, make
settings to suit the type of audio from your
digital equipment (
Conserving power
This unit consumes a small amount of power, even
when it is in standby mode (approx. 0.2 W). To save
power when the unit is not to be used for a long time,
unplug it from the household mains socket.
You will need to reset some memory items after
plugging in this unit.
[Note]
The included AC mains lead is for use with this unit only.
Do not use it with other equipment. Also, do not use
cords for other equipment with this unit.
BE SURE TO READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 4 BEFORE CONNECTION.
≥Use alkaline or manganese batteries.
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in an automobile
exposed to direct sunlight for a long period of time
with doors and windows closed.
Do not:
≥mix old and new batteries.
≥use different types of batteries at the same time.
≥take apart or short-circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage
which can severely damage the remote control.
Remove the batteries if the remote control is not going
to be used for a long period of time. Store in a cool, dark
place.
Use
Aim at the remote control signal sensor (
obstacles, at a maximum range of approx. 7 m directly
in front of the unit.
Features
12).
39), avoiding
9