Roland EGX-20 User Manual page 16

EGX-20 USER'S MANUAL
You can choose to install and set up a program by
5
selecting its corresponding check box.
If you do not want to install a particular program, than
clear the corresponding check box.
Normally you should select all check boxes.
Click the [Install] button.
The setup screen ([Welcome] dialog box) appears for the
6
program whose check box you selected.
If you selected the check boxes for all programs, then the
setup screens appear in succession, starting with Virtual
MODELA.
Click [Next].
The [Select Install Location] dialog box appears.
7
If you want to change the folder to install to, then click
[Browse]. The [Select Directory] dialog box appears.
Choose a drive and folder, then click [OK].
Click [Next].
The [Select Program Folder] dialog box appears.
8
There is no special need to change the program folder.
After you have made sure of the program folder, click
[Next].
Installation starts.
When installation finishes, a prompt dialog box appear.
9
Click [OK].
When the installation of one program finishes,
installation of the next one starts.
In the interval until the next setup starts, a dialog box
showing the progress of processing is displayed.
14