Palm CENTRO User Manual page 61

2 Select Conf. This joins the two calls in a
conference session.
3 To end the conference, press Power/
End to end all the calls.
Pressing Send during a
?
DID YOU KNOW
conference call usually hangs up the second
call. However, depending on your network
connection, you may instead hang up the
first call.
Using Flash mode during a call
Flash mode enables you to manually
manage your calls while one or more calls
are active. This mode is often used during a
conference call when one of the calls has
ended but the other remains connected.
1 Press Send from Active Call View.
2 If the Do you want to switch to Flash
mode prompt appears, select Yes.
3 While in Flash mode, do any of the
following:
If you have one call in progress and
•
you answer an incoming second call,
press Send to swap between the
calls.
If you have one call in progress, to
•
make an outgoing second call, dial the
number using any of the methods
described in Making calls.
If you have one call in progress and
•
you make an outgoing second call,
press Send after establishing a
connection with the second party to
W H A T C A N I D O W H E N I ' M O N A C A L L ?
4
Y O U R P H O N E
61