Palm CENTRO User Manual page 229

2 Make sure that the HotSync manager is
running:
Windows: Right-click HotSync
manager in the taskbar in the
lower-right corner of your computer
screen. Click Settings, and then click
Connections. Make sure that USB is
checked. If you don't see the HotSync
manager icon, click Start, select
Programs/All Programs, select Palm,
and then select HotSync Manager.
Mac: Find the Palm folder on your Mac
hard drive. Double-click the HotSync
manager icon in the Palm folder. In
the Connection Settings panel, set the
Local Setup port to Palm USB.
3 Synchronize. If the synchronization is
successful, you do not need to
complete the remaining steps.
4 Perform a soft reset (see Performing a
soft reset).
5 Synchronize. If the synchronization is
successful, you do not need to
complete the remaining steps.
6 If problems persist and you're
synchronizing through a USB hub, try
connecting the sync cable to a different
USB port or directly to your computer's
built-in USB port.
7 Synchronize. If the synchronization is
successful, you do not need to
complete the remaining steps.
8 Check the sync-connector on the
bottom of your smartphone for debris or
discoloration. Carefully clean the
connector by dipping a cotton swab in
some rubbing alcohol and gently wiping
the metal contacts on the connector.
Try to sync again.
9 Check the connector on the USB sync
cable for integrity and cleanliness. Make
sure the pins on the connector are
straight, protruding, and not damaged. If
the cable appears to be damaged, stop
here and locate another USB sync
cable.
T R O U B L E S H O O T I N G
S Y N C H R O N I Z A T I O N
12
229