Palm CENTRO User Manual page 190

10
Y O U R A P P L I C A T I O N A N D I N F O M A N A G E M E N T T O O L S
When synchronization is complete, a
message appears at the top of your
smartphone screen. Be patient;
synchronization may take a few
minutes.
Synchronizing over an infrared
connection
When you synchronize using the IR port on
your smartphone, you don't need your sync
cable. This is especially useful if you travel
with an IR-enabled laptop.
BEFORE YOU BEGIN
on your computer:
It has an enabled IR port or an IR device
•
attached to it. Check your computer's
documentation to see if it supports IR
communication.
The HotSync manager is active. On a
•
Windows computer, you know the
HotSync manager is active when its
icon appears in the lower-right corner of
your screen.
190
S Y N C H R O N I Z I N G I N F O R M A T I O N — A D V A N C E D
Verify the following
WINDOWS ONLY
1 On your computer, click HotSync
manager in the taskbar in the
lower-right corner of your screen. Make
sure that Infrared is selected.
2 On your smartphone, press
Applications
HotSync .
3 Select Local.
4 Select the pick list below the HotSync
icon and select IR to a PC/Handheld.
5 Position the IR port on your smartphone
within a few inches of your computer's
IR port.
6 Select the HotSync
smartphone.
and select
icon on your