Screen - Palm CENTRO User Manual

12
T R O U B L E S H O O T I N G

Screen

The screen appears blank
1 When a call lasts longer than the limit
specified in Power Preferences, the
screen dims automatically. In certain
lighting conditions, the screen may
appear blank when this occurs.
Press any key except Power/End to
restore the screen to normal brightness.
Pressing Power/End hangs up the call.
The screen backlight may also be set to
dim or turn off after a specified amount
of time (see Optimizing power settings).
2 When a period of inactivity lasts longer
than the limit specified in Power
Preferences, the screen turns off. Press
and release Power/End
the screen.
3 Look closely at the screen. If you can
see a dim image, try adjusting the
screen brightness (see Adjusting the
brightness).
4 If the screen is still blank, perform a soft
reset (see Performing a soft reset).
226
S C R E E N
5 If the problem persists, connect your
smartphone to the charger (see
Charging the battery) and perform a soft
reset again.
6 If that doesn't work, perform a hard
reset (see Performing a hard reset).
The screen doesn't respond accurately to
taps or it activates wrong features
For best results, use the stylus to align the

screen.

1 Press Applications
2 Use the 5-way to select Prefs
3 Use the 5-way to select Touchscreen.
4 Follow the onscreen instructions to
align the screen.
5 Select Done.
to wake up
6 If the problem persists, check for dirt
between the screen and the edge of the
smartphone.
7 If you're using a screen protector, make
sure that it is properly installed.
.
.