Table of Contents
Advertisement
• Always disconnect from the air supply when:
a)
Performing any maintenance.
b)
The sander is not in use.
c)
The sander will be left unattended.
d)
Moving to another work area.
• Avoid damaging the sander for example, by applying excessive force.
• ALWAYS maintain the sander with care. Keep it clean for best and safest
performance.
• Quick change air-line couplings should not be located at the tool. They
add weight and could fail due to vibration.
• DO NOT force or misuse the sander. It will do a better and safer job at the
rate for which it was designed.
• This sander vibrates during use. Vibration may be harmful to your hands or
arms. Stop using the tool if discomfort, a tingling feeling or pain occurs and
seek medical advice before resuming use. Refer to Vibration Emissions on
page 13.
TRANSPORTATION
• Never carry the sander by the air supply hose.
• Never carry the sander with your finger on the trigger.
STORAGE
• When not in use the sander must be disconnected from the air supply and
stored in a dry place out of the reach of children (preferably in a locked
cabinet).
• Avoid storing the sander in environments where the temperature falls
below 0
o
C.
5
Advertisement
Table of Contents
