Dhcp Function - Areca ARC-1110 User Manual

BIOS CONFIGURATION

3.7.6.1 DHCP Function

DHCP (Dynamic Host Configuration Protocol) allows network ad-
ministrators centrally manage and automate the assignment of
IP (Internet Protocol) addresses on a computer network. When
using the TCP/IP protocol (Internet protocol), it is necessary for
a computer to have a unique IP address in order to communi-
cate to other computer systems. Without DHCP, the IP address
must be entered manually at each computer system. DHCP lets
a network administrator supervise and distribute IP addresses
from a central point. The purpose of DHCP is to provide the
automatic (dynamic) allocation of IP client configurations for a
specific time period (called a lease period) and to minimize the
94
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Configuration
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Ethernet Configuration
Physical Drives
Raid System Function
DHCP Function
DHCP Function
Ethernet Configuration
Ethernet Configuration
Local IP Address
View System Events Select DHCP Setting
Ethernet Address
Clear Event Buffer
Hardware Monitor
System information
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
: Enable
: Enable
: 192.168.001.100
: 00.04.D9.7F.FF.FF
Disabled
Enabled