Ethernet Configuration (12/16/24-Port) - Areca ARC-1110 User Manual

Sata raid cards
Table of Contents

Advertisement

WEB BROWSER-BASED CONFIGURATION
ple, one drive might be 123.5 GB, and the other 120 GB. Areca
drive Truncation mode Multiples Of 10G uses the same capac-
ity for both of these drives so that one could replace the other.
Multiples Of 1G: If you have 123 GB drives from different ven-
dors; chances are that the capacity varies slightly. For example,
one drive might be 123.5 GB, and the other 123.4 GB. Areca
drive Truncation mode Multiples Of 1G uses the same capacity
for both of these drives so that one could replace the other.
No Truncation: It does not truncate the capacity.

6.8.2 Ethernet Configuration (12/16/24-port)

Use this feature to set the controller Ethernet port configuration.
A customer doesn't need to create a reserved space on the arrays
before the Ethernet port and HTTP service are working. The firm-
ware-embedded Web Browser-based RAID manager can access
it from any standard internet browser or from any host computer
either directly connected or via a LAN or WAN with no software or
patches required.
DHCP (Dynamic Host Configuration Protocol) is a protocol that
lets network administrators manage centrally and automate the
assignment of IP (Internet Protocol) configurations on a computer
network. When using the Internet's set of protocols (TCP/IP), in
order for a computer system to communicate to another com-
puter system, it needs a unique IP address. Without DHCP, the
IP address must be entered manually at each computer system.
137

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents