Migrating - Areca ARC-1110 User Manual

BIOS CONFIGURATION
disk drives, the Expand Raid Set function allows the users to
add disk drives to the raid set that have already been created.
To expand a raid set:
Select the Expand Raid Set option. If there is an available disk,
then the Select SATA Drives For Raid Set Expansion screen ap-
pears.
Select the target Raid Set by clicking on the appropriate radio
button. Select the target disk by clicking on the appropriate
check box.
Press the Yes key to start expansion of the raid set.
The new additional capacity can be utilized by one or more
volume sets. Follow the instruction presented in the Volume Set
Function to modify the volume sets; operation system specific
utilities may be required to expand operating system partitions.
Note:
1. Once the Expand Raid Set process has started, user cannot
stop it. The process must be completed.
2. If a disk drive fails during raid set expansion and a hot
spare is available, an auto rebuild operation will occur after
the raid set expansion completes.

• Migrating

66
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
Areca Technology Corporation RAID Controller
Main Menu
Raid Set Function
Quick Volume/Raid Setup
Create Raid Set
Raid Set Function
Delete Raid Set
Volume Set Function
Exp
Expand Raid Set
Expand Raid Set
Physical Drives
Activate Raid Set
Raid System Function [*]Ch05| 80.0GBST380013AS
Create Hot Spare
Ethernet Configuration [ ]Ch08|
Delete Hot Spare
View System Events
Raid Set Information
Clear Event Buffer
Hardware Monitor
System information
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Select Drives For Raid Set Expansion
Are you Sure?
80.0GBST380013AS
Yes
No