Clear Events Buffer; Modify Password - Areca ARC-1110 User Manual

WEB BROWSER-BASED CONFIGURATION

6.8.8 Clear Events Buffer

Use this feature to clear the entire events buffer information.

6.8.9 Modify Password

To set or change the SATA RAID controller password, select "Raid
System Function" from the menu and click on the "Change Pass-
word" link. The Modify System Password screen appears.
The manufacture default password is set to 0000. The pass-
word option allows user to set or clear the SATA RAID controller's
password protection feature. Once the password has been set,
the user can only monitor and configure the SATA RAID controller
by providing the correct password.
The password is used to protect the SATA RAID controller from
unauthorized entry. The controller will check the password only
when entering the Main menu from the initial screen. The SATA
RAID controller will automatically go back to the initial screen
142