Areca ARC-1110 User Manual page 52

HARDWARE INSTALLATION
sever, you need first to enable the Fireware-embedded SNMP
agent function and install the SNMP extension agent software
on your server system. If you need additional information about
installation and start-up this function, see the section 6.9.4 SNMP
Configuration (12/16/24-port)
• In-Band-Using PCI-X/PCIe Bus (4/8/12/16/24-port
Adapter)
Before launching the SNMP agent in the sever, you need first to
enable the fireware-embedded SNMP community configuration
and install Areca SNMP extension agent in your server system.
If you need additional information about installation and start-up
the function, see the SNMP operation & Installation section in the
Appendix C
Single Admin Portal (SAP) Monitor
This utility can scan for multiple RAID units on the network and
monitor the controller set status. It also includes a disk stress test
utility to identify marginal spec disks before the RAID unit is put
into a production environment.
For additional information, see the Utility manual in the packaged
CD-ROM or download it from the web site http://www.areca.
com.tw.
52