Main Menu - Areca ARC-1110 User Manual

Note:
A user can use this method to examine the existing configura-
tion. The "modify volume set configuration" method provides the
same functions as the "create volume set configuration" method.
In the volume set function, you can use "modify volume set" to
change all volume set parameters except for capacity (size).

3.7 Main Menu

The main menu shows all functions that are available for executing
actions, which is accomplished by clicking on the appropriate link.
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Option
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System Information
BIOS CONFIGURATION
Verify Password
Create a default configuration based on the number
of physical disk installed
Create a customized raid set
Create a customized volume set
View individual disk information
Setup the RAID system configuration
Ethernet LAN setting (ARC-1x30/1x60/1x70 only)
Record all system events in the buffer
Clear all information in the event buffer
Show the hardware system environment status
View the controller system information
Note:
The manufacture
default password is
set to 0000; this
password can be
modified by selecting
Change Password
in the Raid System
Function section.
Description
59