KitchenAid KUDS30IXBL0 Installation Instructions Manual page 14

Built-up floorsKitchen floorheight i shigher t han
cabinet opening.) Example: Kitchen f loortiledoesnot
extend intocabinet opening. Addshims asneeded i nthe
area shown to bring thedishwasher upto34" (86.4 cm)
below thecountertop.
NOTE: Shims mustbesecurely a ttached t o floorto avoid
movement when thedishwasher is in use.
Mounting stud
Handle
Setscrew
(inbottom
of )
Allen
IMPORTANT: Donotscratch thefrontpanel d uring this
procedure.
Remove t hedoorhandle andhardware bagcontaining
thesetscrews andAllen wrench f romthecardboard box.
Setscrews arealready i nstalled i nthehandle. Place
handle onmounting s tuds withthesetscrews facing
down. P ush thedoorhandle t ightlyagainst thedoor.
Insert theshort e ndoftheAllen wrench intothe
setscrews. Tighten t hesetscrews 1/4 turnpast s nug.
Retain A llenwrench withInstallation I nstructions.
IMPORTANT: Youneed to know what c ontrol panel i son
yourdishwasher before youorder y ourcustom door
panel.
Dishwashers with control panel on
top custom panel dimensions
23 1/2" /" _ -_Z.30 3/16" (76.7 cm)
7 cm'
*This dimension is for 4" (10.2 cm) toe kick. If the
installation needs a higher toe kick, adjust the height
of the wood panel accordingly. Not recommended for
toe kicks greater than 6" (15.2 cm).
Follow directions under Option 1 of "Install custom
panel" section.
Dishwashers with control panel on
front custom panel dimensions
(19.1 mm)
(3.2 mm)
mm)
*This dimension is for 4" (10.2 cm) toe kick. If the
installation needs a higher toe kick, adjust the height
of the wood panel accordingly. Not recommended for
toe kicks greater than 6" (15.2 cm).
Follow directions in Option 2 of "Install custom panel"
section.
14