Making User's Choice Selections
Turn the Main Switch off. While pressing
1
the 4 Exposure Control Key, turn the
Main Switch on. "U1" will appear in the
Display Panel on the Control Panel.
Press the Start Key. The currently set
2
User's Choice code will appear.
Use the Copy Quantity Keys to select the
3
desired User's Choice code.
Press the Clear/Stop Key. The User's
4
Choice code is now registered.
Press the Clear/Stop Key once again.
5
* User's Choice is canceled and the copier
C1159O050DA
The User's Choice mode cannot be selected under
the following conditions: the starter is being
refilled, and the indicators show that an error or
paper misfeeds has occurred.
C1159O051DA
C1159O052DA
C1159O053DA
3. User's Choice
returns to the initial mode.
NOTE
25
C1159O054DA