When The Message "No Staple" Appears; Replacing The Staple Cartridge - Minolta CF911P Manual

3. When the Message "NO STAPLE" Appears

NO STAPLE

Replacing the Staple Cartridge

While holding the Lock Release Lever, slide
1
the Staple Sorter away from the unit.
Open the Stapler Door.
2
While pushing up the Staple Cartridge
3
Release Lever, pull the Staple Cartridge out
of its port.
Pull the staple sheet about 3 cm out of the
4
new Staple Cartridge and break off that
portion.
6-5
The message shown on the left appears when the
staples are running out.
Replace the Staple Cartridge with a new one by
following the procedure given below.
NOTE
Check that no portion of the staple sheet hangs
out of the Cartridge. Break off any portion of the
sheet that hangs out of the Cartridge.
C4119O012AA
Insert the new Staple Cartridge until a click
5
is heard.
Close the Stapler Door and slide the Staple
6
1136O003AA
Sorter back against the printer.
1139O0970A
1134O077AA
1139O1440A
C4119O013AA