Entering Your User Information; Setting The Fax Header - Lexmark 101 User Manual

Connect the printer to any of the N ports.
To connect:
1
Connect one end of a telephone cable to the
2
Connect the other end of the cable to the RJ-11 adapter, and then connect the adapter to an N port.
3
If you want to connect a telephone and answering machine to the same wall jack, then connect the devices as
shown.

Entering your user information

Your user information includes your name or your company name, your fax number (your fax number is your
telephone number, unless you have a dedicated fax telephone line), and the time and date on your fax machine
when a transmission is made. This information appears in the header and footer of the faxes that you send.
In some countries, you cannot send a fax without this information. Some fax machines also block faxes without sender
information, so make sure that you enter this information in your printer.

Setting the fax header

1
From the printer control panel, press
2
Press the arrow buttons to scroll to Fax Setup, and then press
3
Press the arrow buttons to scroll to Dialing and Sending, and then press
4
Press again to select Your Fax Name.
5
Enter your name or your company name, and then press
EXT
LINE
N F N
port of the printer.
.
.
Faxing
80
PHONE
LINE
.
.