Lexmark 101 User Manual page 118

How can I make sure my computer and printer are connected to the
same wireless network?
If the printer is not on the same wireless network as the computer, you will not be able to print wirelessly. The SSID
of the printer must match the SSID of the computer, if the computer is already connected to the wireless network.
For Windows users
1
Obtain the SSID of the network that the computer is connected to:
a
Type the IP address of your wireless access point (wireless router) into the address field of your Web browser.
If you do not know the IP address of the wireless access point:
1
Click , or click Start and then click Run.
2
In the Start Search or Run box, type cmd.
3
Press Enter, or click OK.
The Command Prompt window opens.
4
Type ipconfig, and then press Enter. Check the Wireless Network Connection section:
•
The "Default Gateway" entry is typically the wireless access point.
•
The IP address appears as four sets of numbers separated by periods, such as 192.168.2.134.
b
Type the user name and password of the router when prompted.
c
Click OK.
d
On the main page, click Wireless or any other selection where settings are stored. The SSID will be displayed.
e
Write down the SSID.
Note: Make sure you copy it exactly, including any capital letters.
2
Print the printer network setup page.
In the Wireless section, look for SSID.
3
Compare the SSID of the computer and SSID of the printer.
If the SSIDs are the same, then the computer and the printer are connected to the same wireless network.
If the SSIDs are not the same, then run the utility again to set up the printer on the wireless network used by the
computer.
For Macintosh users with an AirPort base station
In Mac OS X version 10.5
1
From the Apple menu, choose System Preferences.
2
Click Network.
3
Click AirPort.
The SSID of the network the computer is connected to is displayed in the Network Name pop-up menu.
4
Write down the SSID.
Networking
118