Lexmark 101 User Manual page 10

Use the
1 Scanner unit
Ink cartridge access
2
Ethernet port
3
4 USB port
5 LINE port
EXT port
6
7 Power supply with port Connect the printer to a power source using the power cord.
8 Duplex unit
9 Printhead access
3
2
1
9
To
Access the ink cartridges.
Install, replace, or remove the ink cartridges.
Connect your printer to a computer, a local network, an external DSL, or a cable modem.
Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when plugging in or
removing a USB cable or installation cable.
Connect the printer to an active telephone line (through a standard wall jack, DSL filter,
or VoIP adapter) to send and receive faxes.
Connect additional devices (telephone or answering machine) to the printer and the
telephone line. Use this port if you do not have a dedicated fax line for the printer, and
if this connection method is supported in your country or region.
Note: Remove the plug to access the port.
•
Print on both sides of a sheet of paper.
•
Remove paper jams.
Install the printhead.
Note: The carrier moves to the printhead access area when no printhead is installed in
the printer.
About your printer
4
5
6
10
7
8