Network Controller Settings
(System Settings)
Port Settings
Select the interface by which the machine is connected to the client. In Port Settings,
you can set the following items:
LPD
NetWare
SMB
IPP
EtherTalk
Bonjour
Port9100
SNMP
FTP Client
Protocol Settings
Select the parameters that are required for communications between the machine and
client workstations. In Protocol Settings, you can set the following items.
Ethernet Rated Speed
TCP/IP - IP Mode
Xerox
Color C75 Press
®
System Administration Guide
Send E-mail
E-mail Notification Service
UPnP Discovery
WSD
Internet Services (HTTP)
SOAP
WebDAV
IPv6 Address Manual Configuration
Manually Configured IPv6 Address
17
17-1