Xerox C75 System Administration Manual page 259

Using CentreWare Internet Services for Accounting and Authentication / Security
To configure authentication using Xerox Secure Access:
1. In CentreWare IS, click Properties > Security > Authentication Configuration.
2. On the Authentication Configuration page, next to Login Type, select Xerox Secure
Access.
3. Select Enabled next to Print Stored File from Folder, or Enabled next to Folder to
PC/Server Enabled to enable these services.
4. Select Enabled next to Non-account Print to allow users without accounts to access
the printer.
5. Click Apply, then click Reboot Machine.
6. After the printer restarts, refresh your browser and navigate back to the
Authentication Configuration > Step 1of 2 page, and click Next at the bottom of
the page.
7. Next to Authentication System, click Configure.
8. On the Authentication System page select Authentication Agent from the drop-down
list.
9. Type the Server Response Time-Out, and the Search Time-Out.
10. Select Enabled next to Assign UPN (User Principal Name) if desired.
11. Click Apply to accept the changes or Undo to retain the previous settings.
12. Click Reboot Machine.
Configuring Xerox Secure Access Login Settings
1. In CentreWare IS, click Properties > Security > Remote Authentication Servers
Xerox Secure Access Settings.
2. Type the Default Prompt text and Default Title text.
3. Select Enabled next to Local Login to allow users to type their credentials at the
control panel.
4. Select Enabled next to Get Accounting Code to allow the printer to get the user's
accounting code from a network accounting server when the user logs in at the control
panel.
Network authentication and network accounting must be configured. If this setting
is not enabled, the user must enter an accounting code when they log in at the control
panel.
5. Type the Connection Time-Out (1-300 seconds).
6. Click Apply to accept the changes or Undo to retain the previous settings.
Setting Up Authentication for a USB Smartcard Reader System
To use the printer with a card reader system other than Xerox Secure Access, you must
order and install the Xerox Common Access Card Enablement Kit. The kit includes
hardware, software, and instructions for connecting and configuring your card reader
system.
Before you begin:
Install the USB Enablement Kit
Install a Kerberos authentication server and configure with user accounts.
Connect your card reader to the printer.
Xerox Color C75 Press
®
System Administration Guide
22-13