Xerox C75 System Administration Manual page 131

When selecting/editing the various Alignment options, consider these tips:
The arrows above the paper illustration as shown on the UI indicate the feed direction.
Use the up/down arrow buttons to make the desired selections.
As you click the up/down arrow buttons, the illustration moves indicating the direction
that the image will move or increase/decrease on the paper.
Note
The factory default setting for all the Alignment options is zero.
The following adjustments can be made to the position of the output image:
Perpendicularity: Use this when the image is straight on the page, but the corners
are slanted, not at right (90 degree) angles to each other. This feature adjusts the
image digitally on the drum so that it will align with the paper for both side 1 and
side 2.
Skew: Use this when the entire image on the page is slanted and not straight. This
feature adjusts the paper so that the image for side 1 and/or side 2 are not skewed
but aligned with each other.
Magnification: Use this feature to correct for image stretch from side 1 to side 2. The
image may be enlarged or reduced as necessary.
Note
When making adjustments to multiple items, perform the adjustments in the following
order: Perpendicularity, Skew, X/Y% (width/length) Magnification, and finally X/Y Print
Positions.
Xerox Color C75 Press
®
System Administration Guide
Common Service Settings
9-23